Automatic Manganese Sand System
Mn and Iron in the groundwater usually exits as Fe(HCO3)3 and Mn(HCO3)4. After touching with manganese sand and oxidant for filtration, Iron and Mn will be precipitation and manganese which contains filter agent can do backwash automatically to reach re-use for a long time.
When the company establish, Youtec focused on pre-treatment equipment. For many years improvement, Youtec provide users Automatic Manganese Sand System with good quality.
Feature
-
High quality filters and filter media 1.High adsorption of manganese sand can remove Iron and Mn to prevent from red-brown spots. 2.Large filtering area low up and make filteration efficiently.
-
Automatically and high efficiency Automatic Manganese Sand System 1.Regeneration automatically, easy to operate, low cost of operation 2.High manganese oxide ability: 1.5g/L 3.Short time for backwash; low water consumption.
Antirust, anti-corrosion and high pressure resistance 1.USA made FRP tanks which are antirust and anti-corrosion, pressure resistance 150 psi under normal temperature. Material and pressure resistance are certificated with NSF and FDA. 2.Stainless steel cylinder barrels.
Light and handy appearance, no need big space 1.Deal with ground water directly, not necessary to add tank for oxidation; small space is enough. 2.Convenient design and only need half expense of coagulation treatment
Specification
YOUTEC Manganese Sand and De-Iron System Ordering Specification
P/N | Pressure Vessel Ø"x H" | Inlet / Outlet inches |
---|---|---|
MS-10 | 6x35 | 1 |
MS-15 | 7x35 | 1 |
MS-20 | 8x35 | 1 |
MS-25 | 9x35 | 1 |
MS-30 | 10x35 | 1 |
MS-35 | 10x40 | 1 |
MS-40 | 10x47 | 1 |
MS-45 | 10x54 | 1 |
MS-60 | 12x52 | 1 |
MS-70 | 13x54 | 1 |
MS-80 | 13x54 | 1 |
MS-100 | 14x65 | 1 |
MS-120 | 16x65 | 1 |
MS-150 | 18x65 | 11/2 |
MS-160 | 21x62 | 11/2 |
MS-190 | 21x62 | 11/2 |
MS-250 | 24x65 | 11/2 |
MS-300 | 24x72 | 11/2 |
MS-450 | 30x72 | 2 |
MS-500 | 30x72 | 2 |
MS-600 | 36x72 | 2 |
MS-650 | 36x72 | 2 |
MS-700 | 36x72 | 2 |
MS-750 | 36x72 | 2 |
✩PH range is between 6.2-8.5 and temperature is below 30 degree C.
✩The feed pressure is 1.5~5kg/cm²;If the pressure is insufficient, should install the pressure pump, maintains the pressure to be stable.