Automatic Mixed Bed Deionizer

Automatic Operation Mixed Bed Deionize
Automatic Mixed Bed Deionizer is easy to use and it can provide with good water quality. This system use PLC and pneumatic valve as pilot, during regenerating operation,it can do 10~15 different steps.
If power off, PLC can prevent from data loss, then restart and go on the former action automatically.
Automatic Mixed Bed Deionizer is designed for Industrial use.
Advantages
  • Special mixed bed resin

  • Automatic Mixed Bed Deionizer use special resin which particle size is average and can separate clearly cation and anion resins. After regeneration, it can make resin complete regenerate and recovery exchange capacity.

  • Precise PLCPLC is capable of logic judgment, and user can change or set program to operate all situation of pure water process by hand.

  • Auto. regeneration: When water quality below to the setting, PLC will judge the situation to do regeneration. After regeneration, it will produce pure water.
    Semi-auto regeneration: Automatic regeneration can switch to manual. Depends on user's mind to do regeneration step by step.

  • Maintain and Guarantee Good water quality

  • When PLC judge the water quality is lower than setting, it will do rinse.
    If water quality still can't improve, it will stop feed water and regenerate automatically. If it still can't improve, alarm will work to reach the safe and economical running.

Specification
Model Capacity
Grains
Flow
GPM
Pipe
Inch
Tank Size
D x H (cm)
AMB-100 26,300 4 - 13 1" 35 x 200
AMB-150 39,600 6 - 20 1" 45x 200
AMB-200 52,800 8 - 27 1 1/2" 50 x 200
AMB-250 66,000 11 - 33 1 1/2" 5 x 200
AMB-300 79,200 13 - 40 2" 60 x 210
AMB-350 92,400 15 - 46 2" 63 x 220
AMB-400 105,600 18 - 53 2" 65 x 240
AMB-450 118,800 20 - 59 2" 69 x 240
AMB-500 132,000 22 - 66 2 1/2" 7 x 240
AMB-550 145,200 24 - 73 2 1/2" 74 x 240
AMB-600 158,400 26 - 79 2 1/2" 78 x 240
Material:SS41 Steel welded and rubber lining
※Remark:Custom-made is available upon request.